Making outdoor patio furniture covers is easier than you think. By making your own covers you get the design and colors that you want. Making your own covers will also save you money. I have seen patio set covers made out of a variety of different fabrics. There is no right fabric. The choice of fabric is up to the individual taste.
It is important that your patio furniture be protected from the elements. The amount of protection your furniture will need is dependent upon where you live. Those people that live in tropical areas will want to protection their furniture from the blazing sun or salt spray every chance they get. The tropical sun will remove an entire layer of varnish in less than 6 months. Unless you don’t mind sanding and re-varnishing you best acquire some covers for your patio furniture.
The first step to making your own covers is material selection. There are more factors to consider than color or pattern alone. The price point of the material is going to be dependent on the quality. There are some specially formulated materials which are more weather resistant than others, which will obviously be more expensive than a generic fabric. This is not necessarily always the case, so it is important that the material you choose is worth the cost, both in terms of protective value, as well as esthetic appeal.
Now you are ready to design the shape of your patio covers, and take measurements to cut your material and assemble it. When creating custom designed covers, you must think in terms of the volume that your furniture occupies. Most pieces can be simplified into very basic shapes, such as rectangles, cubes and tubes. Covering a table will require you to create a simple box, cutting the top and side cut a few inches larger than the table measurement to allow for seams and a little extra ‘wiggle-room’. You will also want to create a slight widening taper towards the bottom so the cover slides easily over the table without getting stuck halfway down.
Creating a custom fitting cover for your chair is as simple as creating essentially a cube with one side shorter than the other. The back will be a rectangle measuring the same as the back of the chair, and the front will measure the same as the front of the chair, either as high as the seat, or the top of the arms if your chair has arms. The sides are slightly trickier, since they are not rectangles, but rather they are cut with one side as high as the arms or seat at the front, and the other side cut to the height of the chair back. Make sure that all your pieces have a seam allowance, and a bit of extra size so they will slip easily over the chair once constructed. As with table covers, you can add a hem with a drawstring at the bottom if you chair covers need extra securing.
With a little planning, and a little measuring and a little sewing, you can see how easy it is to create your own set of completely custom outdoor patio furniture covers. The best part about making your own set is the ability you will have to create an entirely unique look for your back yard or patio, not to mention the cost savings compared to having a custom set of furniture covers made to order.
Related posts:
- How to Install Patio Doors
- Dress Up Your Living Room With Slipcovers
- The Different Kinds of Spa Covers You Can Buy
- How to Choose Outdoor Patio Lights
- Interior Design Ideas To Be Used For The Home Office
Tags: b, backyard, f, furniture, g, garden, garden furniture, h, hobbies, Home, home and garden, home design, Home Improvement, home;accessory, house and home, o, outdoor decor, outdoor design, outdoor furniture, P, patio furniture, patio furniture covers
