Household Fixes

Making outdoor patio furniture covers is easier than you think. By making your own covers you get the design and colors that you want. Making your own covers will also save you money. I have seen patio set covers made out of a variety of different fabrics. There is no right fabric. The choice of fabric is up to the individual taste.

It is important that your patio furniture be protected from the elements. The amount of protection your furniture will need is dependent upon where you live. Those people that live in tropical areas will want to protection their furniture from the blazing sun or salt spray every chance they get. The tropical sun will remove an entire layer of varnish in less than 6 months. Unless you don’t mind sanding and re-varnishing you best acquire some covers for your patio furniture.

The first step to making your own covers is material selection. There are more factors to consider than color or pattern alone. The price point of the material is going to be dependent on the quality. There are some specially formulated materials which are more weather resistant than others, which will obviously be more expensive than a generic fabric. This is not necessarily always the case, so it is important that the material you choose is worth the cost, both in terms of protective value, as well as esthetic appeal.

Now you are ready to design the shape of your patio covers, and take measurements to cut your material and assemble it. When creating custom designed covers, you must think in terms of the volume that your furniture occupies. Most pieces can be simplified into very basic shapes, such as rectangles, cubes and tubes. Covering a table will require you to create a simple box, cutting the top and side cut a few inches larger than the table measurement to allow for seams and a little extra ‘wiggle-room’. You will also want to create a slight widening taper towards the bottom so the cover slides easily over the table without getting stuck halfway down.

Creating a custom fitting cover for your chair is as simple as creating essentially a cube with one side shorter than the other. The back will be a rectangle measuring the same as the back of the chair, and the front will measure the same as the front of the chair, either as high as the seat, or the top of the arms if your chair has arms. The sides are slightly trickier, since they are not rectangles, but rather they are cut with one side as high as the arms or seat at the front, and the other side cut to the height of the chair back. Make sure that all your pieces have a seam allowance, and a bit of extra size so they will slip easily over the chair once constructed. As with table covers, you can add a hem with a drawstring at the bottom if you chair covers need extra securing.

With a little planning, and a little measuring and a little sewing, you can see how easy it is to create your own set of completely custom outdoor patio furniture covers. The best part about making your own set is the ability you will have to create an entirely unique look for your back yard or patio, not to mention the cost savings compared to having a custom set of furniture covers made to order.

Tags: b, backyard, f, furniture, g, garden, garden furniture, h, hobbies, Home, home and garden, home design, Home Improvement, home;accessory, house and home, o, outdoor decor, outdoor design, outdoor furniture, P, patio furniture, patio furniture covers
Posted in Home | No Comments »

As the earth’s energy resources such as gas, coal and oil become scarcer, it’s vital that new sources of energy are found, both for industrial and domestic use. It’s not surprising that many families are looking to “green energy” for their power requirements.

Huge wind turbines can be seen in many parts of the countryside, but a wind turbine suitable for an average family home can be built from scratch. It’s not that difficult (or expensive)

There is hardly a place on earth that does not have enough wind activity to keep a home-built turbine whirring away. The great thing about wind energy is that its free! Like solar power and of course water which powers various hydro-electric power stations, it is something that occurs naturally. Its available all the time, waiting to be harnessed, to be tapped into.

It is possible to build such a system for $200 or less. With a little know-how, and a reasonably good DIY ability, you could conceivably build such a system over the course of a weekend. And the materials you will need should be available in your local hardware store.

Its no wonder really, that so many people are turning to this source of energy. It is very satisfying to be able to produce your own home made wind power. You could even produce more than you need ” then sell it back to the electricity company. Thats a nice thought – watching the electricity meter going backward for a change!

There are many arguments in favour of building such a system – one thing that I like about wind power is that its so clean – there is no smoke, no waste material to worry about. And the wind is freely available to all.

The great saving that can be achieved through a home wind system is one of the main attractions. It’s estimate that it could reduce your energy bill by 80% – or eliminate it altogether| You are saving from the day it is connected up.

Once the system is up and running, it will require a minimum of maintenance. And the running costs will be low also.

Another good thing about producing home wind power, is that it is of course helping in the fight against global warming, and reducing one’s carbon footprint.

Wind power has been in use for many years in electricity generation, and is tried and tested. The technology is well developed and it is now available to supply power to an average home. I’m sure we will see more and more families turning to wind power, as the public realises its many advantages.

Tags: a, alternative energy, d, dit, diy, g, garden, green energy, green power, h, Home, home & family, Home Improvement, home wind energy, Home Wind Power, home wind turbines, home;improvement, home;repair, i, o, r, t, technology
Posted in diy | No Comments »

Solar lights have become popular and are lights for today and the future. We have been using energy from the sun for years, but it has only been recently that we can use this power in an efficient way. With solar lights, we are able to take another big step towards keeping the earth cleaner and safer.

Not only are solar lights able to be used in many ways, but they are earth friendly too. The sun is a source of energy that is renewable and we can use the energy from it without causing more pollution to occur. Using solar lights allows us to light up our world without having to increase negative effects on the earth.

It’s a good idea to take a look at how solar lights actually work. The light fixtures actually have a little solar power on top of them. They are a lot like the panels you see on roofs for homes, but much smaller. During the time that the sun is out, the panel collects energy from the sun, which is transferred to a battery that can be recharged again and again. When the sun is out, the battery charges up, and then when it gets dark, that energy is taken and used on the LED light, which provides light through the dark hours.

For the most part, solar lights are used for backyards, pool lights, lights around doors, and for lighting up the gardens as well. You can find various types of solar lights, and some of them are merely functional, while others are beautiful and decorative in nature. Solar lights can be hung from trees, put up on buildings, or even mounted on posts to provide even more light. Various lantern style lights are available, and they can be put near the ground to help you safely be able to walk down a sidewalk or path. There are even floating lights available, which look great on pools or in ponds, and add a bit of decorative charm.

Installation of solar lights is quite easy. There are no trenches to dig for the lights and no complicated wiring to deal with either. It’s very simple to press these lights into the ground or to hang them up somewhere. These lights are independent from each other, and only need to be placed in an area where they get plenty of sunlight.

LEDs are much longer lasting than regular light bulbs and use very little power to keep going. More often than not the LED will last as long as the solar light fixture itself, years. Because LEDs are dimmer than regular bulbs, fixtures are manufactured using reflective surfaces and are available with numerous LED to increase brightness.

Solar lights are going to vary in costs. Some home improvement stores offer great prices, while a boutique with garden enhancing lights may charge a bit more for the lights. No matter what you pay for them, you won’t have to keep paying for electricity to use the lights, since sun light doesn’t cost a thing. If you replace other lighting fixtures that use electricity with these solar lights, you will probably notice that you save some money on your electric bill.

There are so many benefits to using solar lights. Even during the winter when the days are gloomy, the battery will still get enough sun to charge them. The lights will go on and off on their own as long as the sun rises and sets. There is no heat coming from the LED’s either, which means your kids and pets are totally safe. If the power goes off, you can go outdoors and enjoy the light from your solar lights. They also benefit the earth, and they make great choices for your outdoor lighting needs.

Tags: e, energy, g, gardening, global warning, green homes, green living, h, home & family, home and garden, home;improvement, l, o, organic living, r, renewable energy, s, solar energy, solar power, t, technology
Posted in solar power | No Comments »